165 mm Slot-die heads

165 mm Slot-die heads
150 mm slot width
  • Stainless
  • PEEK

165 mm slot–die head (150 mm slot width)

  • Stainless
  • PEEK
infinityPV offer slot-die heads in different materials: PEEK, Alloy and stainless steel, suiting the different needs of chemistry, weight and thermal latency. They are available in gasket-less forms with very few parts that are easy to assemble and easy to clean and also in forms suitable for pressurized operation. Common to the infinityPV slot-die heads, is that they offer reliable operation with minimum maintenance at low cost. They also fit all our coating and printing platforms. We have a number of standard heads and shim kits in stock and we can of course always make the slot-die head and shim kits according to your needs.

Remember to also get shim kit and fitting kit for your slot-die head!

PEEK Alloy Stainless
Ultra-light weight yes
Light weight yes
Heat conducting yes
Corrosion resistant yes yes
Pressurized head yes

slot die coating head infinityPV slot die heads for coating and printing ink processing thin films applications infinityPV slot die heads for coating and printing ink processing thin films applications infinityPV slot die heads for coating and printing ink processing thin films applications

Related products

Solar cell sample package
3 x Demonstrator solar cell
1 x SOLO solar foil
1 x bidirectional solar foil

DIY Flexible Solar Kit
The DIY Flexible Solar Kit is a package containing flexible solar cells, converter board, resistors, wires, and connectors.

Set-1-USB
1x OPV3W60V board (USB version)
2x connector cable
3x Solar foil bi-directional

Set-1-Charger
1x OPV3W60V board (battery charger version)
3x connector cable
3x Solar foil bi-directional

Set-2-USB
1x OPV3W60V board (USB version)
2x connector cable
2x Solar foil bi-directional

Set-2-Charger
1x OPV3W60V board (battery charger version)
3x connector cable
2x Solar foil bi-directional

Set-3-USB
1x OPV3W60V board (USB version)
2x connector cable
2x Solar foil uni-directional

Set-3-Charger
1x OPV3W60V board (battery charger version)
3x connector cable
2x Solar foil uni-directional

DIY Solar Lamp kit
1x solar tape bidirectional
3x connector cables
1x 105mAh Li battery
1x DIY Solar Lamp board

Postcard solar cell (> 5%)
The small post card sized infinityPV modules shows how polymer solar cells can be utilized and enable you to test and operate them.

School set (32 solar cells)
infinityPV School set contains 32 OPV modules ready for use.

1m bidirectional Solar tape (> 4%)
Solar Tape is a flexible organic solar cell foil with optional lined adhesive that functions as a solar sticker.

1m x 285 mm PV foil (3%)
infinityPV foil is infinitely printed organic solar cell (OPV) by the meter.

450 x 285 mm PV foil (~ 3%)
infinityPV foil is infinitely printed organic solar cell (OPV) by the meter.

450 x 285 mm PV foil (~ 4%)
infinityPV foil is infinitely printed organic solar cell (OPV) by the meter.

High school set
infinityPV High school set contains 28 high performing solar cells.

110 mm wide bidirectional Solar tape (> 4%)
Solar Tape is a flexible organic solar cell foil with optional lined adhesive that functions as a solar sticker.

110 mm wide bidirectional Solar tape (> 3%)
Solar Tape is a flexible organic solar cell foil with optional lined adhesive that functions as a solar sticker.

SOLO - 3W panel
The SOLO panels are light weight, flexible, do not splint, can be molded to curves and with easy installation.

SOLO - 6W panel
The SOLO panels are light weight, flexible, do not splint, can be molded to curves and with easy installation.

SOLO - 9W panel
The SOLO panels are light weight, flexible, do not splint, can be molded to curves and with easy installation.

SOLO - 12W panel
The SOLO panels are light weight, flexible, do not splint, can be molded to curves and with easy installation.

SOLO - 18W panel
The SOLO panels are light weight, flexible, do not splint, can be molded to curves and with easy installation.

SOLO - 24W panel
The SOLO panels are light weight, flexible, do not splint, can be molded to curves and with easy installation.

OPV3W60V USB version
1x OPV3W60V board (USB version)

OPV3W60V Charger version
1x OPV3W60V board (Charger version)

OPV3W60V DIY version
1x OPV3W60V board (DIY version)

LiBAT5V2A Basic
LiBAT5V2A is an evaluation board to complement solar battery chargers in your solar-powered projects.

LiBAT5V2A Monitoring
LiBAT5V2A is an evaluation board to complement solar battery chargers in your solar-powered projects.

DIY Solar Lamp board
DIY Solar Lamp board allows the safe charging of a small Li battery from solar cells.The board includes JST connectors, internal switch and white LED.

OPV12W60V
Conversion electronics for the SOLO panels

DC-Transformers 18W180V
DC transformers for SOLO panels

CalCell reference device
The CalCell reference device for calibration of your solar simulator.

Doped ZnO ink (water)
Inks for processing of printed solar cells such as OPV and perovskite solar cells.

Doped ZnO ink (methanol)
Inks for processing of printed solar cells such as OPV and perovskite solar cells.

ZnO ink (2.8 %) (acetone)
Inks for processing of printed solar cells such as OPV and perovskite solar cells.

ZnO ink (2.8 %) (isopropanol)
Inks for processing of printed solar cells such as OPV and perovskite solar cells.

ZnO ink (5.6 %) (acetone)
Inks for processing of printed solar cells such as OPV and perovskite solar cells.

ZnO ink (5.6 %) (isopropanol)
Inks for processing of printed solar cells such as OPV and perovskite solar cells.

ZnO ink (alcohol)
Inks for processing of printed solar cells such as OPV and perovskite solar cells.

40 mm Slot-die heads
10 mm slot width
  • Stainless
  • PEEK
  • Alloy

Slot die head start-up package
Slot-die coating start-up package with 3 different slot-die heads and all needed accessories.

65 mm Slot-die heads
50 mm slot width
  • Stainless
  • PEEK
  • Alloy

115 mm Slot-die heads
100 mm slot width
  • Stainless
  • PEEK
  • Alloy

165 mm Slot-die heads
150 mm slot width
  • Stainless
  • PEEK

Fitting Kit
All infinityPV slot-die heads require fitting kits for feeding the ink to the slot-die head.

Shim kit for 65 mm slot-die head
Shim kit for coating width of:
  • 50 mm
  • 4 x 10 mm
  • 5 x 8 mm

Shim kit for 115 mm slot-die head
Shim kit for coating width of:
  • 100 mm
  • 8 x 10 mm
  • 10 x 8 mm

Shim kit for 40 mm slot-die head
Shim kit for coating width of:
  • 8 mm
  • 10 mm
  • 13 mm

Shim kit for 165 mm slot-die head
Shim kit for coating width of:
  • 150 mm


*Prices will be shown in DKK in the shopping cart. Shipment and VAT (for EU countries) will be added upon checkout. You can opt to pay through PayPal or with a major credit card. You can return items within 14 days of original purchase date for a full refund or exchange. The items must be returned in their original packaging, in an unopened and unused condition. Refunds do not include shipping and handling.
infinityPV 2021, all rights reserved